page-b

Isizinda sokuhlola amandla kagesi (i-gprs.lora)

I-terminal yokuhlola amandla kagesi esebenza ngogesi isetshenziselwa kakhulu ukusetshenziswa kwezigaba ezintathu zamandla, futhi ingafakelwa umsebenzi wokuxhumana we-RS485 nomsebenzi wokuxhumana okungenantambo, olungele abasebenzisi ukwenza amandla, ukuqoqwa kanye nokuphathwa kokuqapha kokude. Umkhiqizo unezinzuzo zokucaca okuphezulu, usayizi omncane, nokufakwa okulula. Ingafakwa kalula futhi isatshalaliswe ebhokisini lokusatshalaliswa ukuthola isilinganiso samandla afakiwe, izibalo nokuhlaziywa kwezindawo ezahlukahlukene nemithwalo ehlukile.


Imininingwane Yomkhiqizo

Amathegi Omkhiqizo

--Ulwazi oluvamile--

 

Izici zomkhiqizo:

Ujantshi we-1.DIN, usayizi omncane

I-2.Adopt evulekile uhlobo lokuguqulwa, olungafakwa ngaphandle kokuphelelwa ngamandla

I-3.Inayo yonke imisebenzi yokulinganisa yemitha yamandla emisebenzi emikhakha emithathu

Ukuxhumana okungenantambo, ukuxhumana okulula nokusebenza okuzinzile

5.Kutholwe umsebenzi wokuqapha ukuqina kwentambo yesigaba ezintathu ukuvikela umlilo nokuqeda izingozi zokuphepha

6. Umsebenzi wokuqapha wamanje wokuqashwa wenza ukuthi ukunikezwa kwamandla kuthembeke ngokwengeziwe

 

——Umsebenzi Womkhiqizo——

 

Umsebenzi wokuxhumana: 1. Ukuxhumana okujwayelekile kwe-1 RS485.

Module 2.Optional

Imodyuli ye-GPRS: Inethiwekhi yomphakathi ye-GPRS yeselula (inethiwekhi ye-2G).

Imodyuli yeLora: Ukuxhumana kwe-NB-Lot, ukusetshenziswa kwamandla okuphansi.

Umsebenzi we-3.Main: I-terminal yokuhlola ukusebenza kahle kwamandla ingaba namasethi amabili wama-schedule amashejuli, angaguqulwa ngokuzenzakalelayo ngesikhathi okuvunyelwene ngaso; iqoqo ngalinye lesheduli lisekela amanani ama-4 nezikhathi eziyi-8.

I-terminal yokuqapha ukusebenza kwe-Energy ingalinganisa yamanje, amandla, amandla asebenzayo, amandla asebenzayo, amandla asheshayo, amandla wamandla, njll.

Ama-5.Feature: I-terminal yokuqapha ukusebenza kwamandla ingalinganisa amandla asebenzayo futhi asebenzayo ezigaba A, B, no-C, namandla akhuthele futhi asebenzayo wezigaba A, B, no-C, namandla ahlanganayo asebenzayo.

I-6.Metering chip: Sebenzisa ukucaca okuphezulu, ukuzwela okuphezulu, ukuqina okuphezulu, ububanzi obuningi, i-chip ephansi yokulinganisa amandla

 

——Amapharamitha wezobuchwepheshe——

 

Amandla voltage 3 * 380V,3 * 100V
Ukucaciswa kwamanje 5A, 100A, 200A, 300A, 400A, 600A
Kukalwa imvamisa 50Hz
Izinga lokunemba Izinga 1 elisebenzayo, Ileveli esebenzayo 2
Ukusetshenziswa kwamandla Umugqa we-Voltage: <= 2W, 5VA; umugqa wamanje: <2VA
Ezokuxhumana RS485:2400bpsI-Micropower engenantambo:470MHzI-GPRS:900 / 1800MHzOkujwayelekile: DL / T645–2007IMODEBUS
Imitha Constant (imp / kWh) 6400400
Isilinganiso Amandla +/- 1%, inani elisebenzayo +/- 1%, + / - 3 ℃, Ukunemba kwe-Clock 0.5second / usuku

 

——Izithombe zomkhiqizo——

 

Electric Energy Efficiency Monitoring Terminal ( GPRS.Lora ) (1)  Electric Energy Efficiency Monitoring Terminal ( GPRS.Lora ) (4)  Electric Energy Efficiency Monitoring Terminal ( GPRS.Lora ) (3)  Electric Energy Efficiency Monitoring Terminal ( GPRS.Lora ) (2) Electric Energy Efficiency Monitoring Terminal ( GPRS.Lora ) (5)

 

 

——Izindlela Zokuxhuma Kwentambo——

 

Ukufaka nokufaka izintambo:

Izinzwa ze-A, B, ne-C ezivulekile zihlanganiswa ngandlela-thile nezintambo ze-A-isigaba, B-isigaba, kanye ne-C-phase. Ngasikhathi sinye, ama-voltages wesigaba esithathu se-A, B, no-C athathwa kusukela kwisigaba esine-cable phase-terminal, kanti ezinye iziteshi ezi-3 ziyefana nangaphezulu, Ngemuva kwalokho ukufakwa kungaqedwa.


  • Esedlule:
  • Olandelayo:

  • Bhala umyalezo wakho lapha bese usithumela kithi